INGENIEURSBUREAU

VAN DIJK SURINAME N.V.

 

 

VADINI 14" Waterpomp

VADINI Waterpump

 

Our VADINI-pump has a capacity of approximately 1 000 m3 per hour @ 875 rpm at the pulley. It requires an electrical engine, a combustion engine or it can be driven by the PTO of a tractor. The motive power unit has to be at least 25 hp.

The pump is applied by:

- Rice farmers to irrigate and evacuate the rice fields
- Fish breeding companies to refresh the water basins and ensure a good water
  flow

The main suction pipe is made of one piece and has a diameter of 14". The axe is supported on two REXNORD bearings.

We can customize the pump any way you want.

Wen you need a greater capacity, we can supply you with waterpumps from The Lo-Lift Pump Co., Inc. Their capacity goes up to 30 000 gallons per minute.

Ask for more information.

 

Related Links: Rexnord.jpg (3179 bytes)

 

Top Of Page

 

VADINI Industrial Fan

VADINI Crop

 

VADINI Industrial Fan

 

Vadinicrop

The VADINI Industrial Fan is mostly used to push hot air into the drier bin of rice mills. It is driven by a 40 pk electric motor. When there is no electricity available in your mill or other workshop, we can make a VADINICROP. This is a VADINI Industrial Fan, driven by a Detroit Diesel 4-53 or 3-71 combustion engine.

VADINI Burner pot

VADINI Burner pot

Burnerpot

The VADINI Burnerpot is used to catch hot air coming from the flame of a Industrial Combustion Burner. The VADINI Industrial Fan, placed at the front of the pot, sucks in the hot air and pushes it into the drier. Through this system the rice miller is capable of drying approximately 47 tons of paddy within 15 hours, taking out 4 to 5% moisture. (Industrial Combustion Burner model ME19).

Ask for more information.

 

Related Links: Homepage of Detroit Diesel Corporation Industrial Combustion Homepage

 

Top Of Page